Temp error

Ian · Post by **Ian** » Mon Jan 29, 2007 9:09 pm

Hi, i seam to be getting errors in temps display over the north west of scotland.

see below.

Is anybody else having the same problem

Ian

Dave Exton · Post by **Dave Exton** » Mon Jan 29, 2007 9:48 pm

Hi Ian,

Yeahp, I've been geeting similar results. If you "quality control" the area (of this hot-spot), you'll find a bouy in that region giving very high readings. I delete the temperature on that bouy and re do the analysis.

Hope that helps!

Regards,
Dave Exton, UK.

Ian · Post by **Ian** » Mon Jan 29, 2007 9:53 pm

Cheers, found that bouy, can keep ignoring it when i run script

wxforecaster · Post by **wxforecaster** » Tue Jan 30, 2007 3:34 am

Instead of ignoring it, you could just delete it out of the station list! Then you wouldnt have to worry about it again!

Wally Mayo · Post by **Wally Mayo** » Wed Jan 31, 2007 2:32 am

Yeah, well, I've noticed that for some problematic buoys off the US east coast, you can't delete the station off the station list. The buoys are plotted as lat/long, not off the list. One would have to find and edit out the report. You have to use a good text editor to avoid losing LINE FEEDS.