The Weather Forecasting Forum

Discussions about the latest in meteorology, programs, tools, and techniques
It is currently Mon Oct 23, 2017 9:35 am

All times are UTC




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Help!
PostPosted: Sun Feb 18, 2007 6:11 pm 
Offline
Member

Joined: Fri Jun 25, 2004 10:40 am
Posts: 42
Jeff, anyone;

I have installed the 2.1 beta files. I keep getting a mapfile error message. I have ALL of my wingridds files on my E: drive and I have changed the wingmode file accordingly to such as well as having changed my map files from WORLD to OTHER.

Thank you in advance.

Andy


Top
 Profile  
 
PostPosted: Sun Feb 18, 2007 8:53 pm 
Offline
Junior Member

Joined: Mon Dec 01, 2003 6:41 pm
Posts: 7
I'm also getting an error: ERROR - MAPFILE NOT FOUND

Here's my wingmode.dat file:

------------------------------------------------------------------------------------
'c:\WINGRIDDS\GRIB\WAFS\'
'c:\WINGRIDDS\GRIB\NWS\'
'c:\WINGRIDDS\GRIB\MOS\'
'c:\WINGRIDDS\GRIDDATA\'
'METER'
'WORLD'
'C:\WINGRIDDS\PRTFIL\'
'.PNG'

--------------------------------------------------------------------------------------

Here is my wingridds.log file:

--------------------------------------------------------------------------------------
STARTING WINGRIDDS - BETA Release 2.4 02/01/2007

lbinit start
Getmsg Start
Getmsg End
Getmsg Start
Getmsg End
rewlbl start
rewlbl end
rsetlbl start
ctmplbl start
ctmplbl end
rsetlbl end
lbinit end
CreateProdMenu START
CreateProdMenu END
uprcs1 start
uprcs1 end
WINGRIDDS: DIRDATA = c:\WINGRIDDS\GRIDDATA\
uprcs1 start
uprcs1 end
uprcs1 start
uprcs1 end
clrcmd start
clrcmd end
LVL,BTM,TOP,IFHR,HR1,HR2,LYR?,TIM?= 850 1000 500 0 0 24 0 0
rdpltm start
NPLVL,PLVL= 10 1000 850 700 500 400 300 250 200 150 100
NTIM,TINC,TIM= 13 1 72 66 60 54 48 42 36 30 24 18
12 6 0
rdpltm end
wtpcgln start
grftxt start
grftxt end
wtpcgln end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
PCGRIDDS32 STARTING
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
OPEN
COMMAND MODE
uprcas start
uprcas end
uprcas start
uprcas end
uprcs1 start
uprcs1 end
lstcmd start
cchsub start
cchsub end
lstcmd end
PCGRIDDS32: DO THE LOOP
OPEN
clrcmd start
clrcmd end
alias start
alais end
findit start
cmdopen start
grdopn start
FEB180700.NGM104
uprcs1 start
uprcs1 end
wtpcgmsg start
grftxt start
grftxt end
wtpcgmsg end
C:\WINGRIDDS\GRIDDATA\\FEB180700.NGM104
FILE IS VERSION 2
OPENED - 0 0 0 0 0
OPENED - NGMS 5 1 147 1 110 279 4184
grddir start
grddrx2 (grddir) start
GSZ,XS/E,YS/E= 5 1 147 1 110
order4 start
order4 end
order4 start
order4 end
order2 start
order2 end
GRDDRX2: GMESHL = 90.75500
GRDDRX2: GLONVT = 105.0000
GRDDRX2: TRULAT = 60.00000
GRDDRX2: ALAT11 = 0.0000000E+00
GRDDRX2: ALON11 = 0.0000000E+00
GRDDRX2: GRID DESCRIPTION SECTION = 5 147 110
-268 -139475 8 -105000 90755 90755
0 64 0 0 0 0
0 0 0 0 255 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
104
grddrx2 (grddir) end
grddir end
chekit start
getit1 start
setfhrfl start
gdfhrs start
gdfhrs end
setfhrfl end
0
F-IFH/ILV/IPRFL/IER= 1 -99 -99 0
setlvlfl start
setlvlfl end
SFC
L-IFH/ILV/IPRFL/IER= 1 2 -99 0
ALAT
P-IFH/ILV/IPRFL/IER= 1 2 5 0
getit1 end
chekit end
setqcn start
stqcn1 start
STQCN1: BLWUP = 999.0000
STQCN1: FLT = 999.0000
STQCN1: FLN = 999.0000
STQCN1: IXS = 1
STQCN1: IXE = 147
STQCN1: IYS = 1
STQCN1: IYE = 110
adjlon start
adjlon end
SETQCN - FLAT,FLON,BLOWUP 44.00000 111.0000 13.00000
adjlon start
adjlon end
STQCN1-1.0: FLAT = 44.00000
STQCN1-1.0: FLON = 111.0000
STQCN1-1: GMESHL = 90.75500
STQCN1-1: GLONVT = 105.0000
STQCN1-1: TRULAT = 60.00000
STQCN1: CALLING W3FB04
STQCN1-1: XI = 69.68685
STQCN1-1: YJ = 54.19725
adjlon start
adjlon end
FLAT,FLON,YJ,XI 44.00000 111.0000 54.19725 69.68685
MESH 44.00000 105.0000 90.75500 60.00000
XLLFT,YLLFT,XURHT,YURHT 56.06518 45.20146 83.30853
65.68518
qcnmp1 start
ERROR - MAPFILE
DATA\C:\WINGR.MAP
NOT FOUND
xfermap start
dmpmap start
dmpmap end
dmpmap start
dmpmap end
xfermap end
qcnmp1 end
MAP CENTER LAT/LON/N-S DIST= 44.00000 111.0000 13.00000
stqcn1 end
subset start
MAX GRIDPTS = 5000
adjlon start
adjlon end
wtpcgmsg start
grftxt start
grftxt end
wtpcgmsg end
subset end
mpfltn1 start
===>>> MPFLTN1 CALLED 0
getit start
getit1 start
ALAT
P-IFH/ILV/IPRFL/IER= 1 2 5 0
JGNM,IGRP,NGRP,NPST,NLFT,IFL,JGL= 17 1391 0 0 5 3238 1619
ALAT/ SFC/ 0 5 V,GN/X=-0.2680E+00 0.8700E+00-0.8700E+00 56 84 45 66 1
getit1 end
getit end
getit start
getit1 start
ALON
P-IFH/ILV/IPRFL/IER= 1 2 6 0
JGNM,IGRP,NGRP,NPST,NLFT,IFL,JGL= 22 1391 0 0 6 3238 1619
ALON/ SFC/ 0 6 V,GN/X= 0.1392E+03 0.3598E+03-0.3593E+03 56 84 45 66 1
getit1 end
getit end
getit start
getit1 start
FFFF
P-IFH/ILV/IPRFL/IER= 1 2 8 0
JGNM,IGRP,NGRP,NPST,NLFT,IFL,JGL= 32 1391 0 0 8 3238 1619
FFFF/ SFC/ 0 8 V,GN/X=-0.1297E-04 0.2571E-04-0.1438E-05 56 84 45 66 1
getit1 end
getit end
getit start
getit1 start
DMAP
P-IFH/ILV/IPRFL/IER= 1 2 7 0
JGNM,IGRP,NGRP,NPST,NLFT,IFL,JGL= 27 1391 0 0 7 3238 1619
DMAP/ SFC/ 0 7 V,GN/X= 0.4841E+05 0.4821E+03-0.4809E+03 56 84 45 66 1
getit1 end
getit end
getit start
getit1 start
EDIR
P-IFH/ILV/IPRFL/IER= 1 2 9 0
JGNM,IGRP,NGRP,NPST,NLFT,IFL,JGL= 37 1391 0 0 9 3238 1619
EDIR/ SFC/ 0 9 V,GN/X=-0.3459E+02 0.3593E+03-0.3598E+03 56 84 45 66 1
getit1 end
getit end
getit start
getit1 start
CLAT
P-IFH/ILV/IPRFL/IER= 1 2 9 29
getit1 end
getit end
getit start
getit1 start
MSG0
P-IFH/ILV/IPRFL/IER= 1 2 3 0
JGNM,IGRP,NGRP,NPST,NLFT,IFL,JGL= 7 1391 0 0 3 3238 1619
MSG0/ SFC/ 0 3 V,GN/X= 0.1000E+01 0.9108E-43-0.1000E-24 56 84 45 66 1
getit1 end
getit end
mpfltn1 end
setqcn end
grdopn end
LVL,BTM,TOP,IFHR,HR1,HR2,LYR?,TIM?= 850 1000 500 0 0 24 0 0
wtspecln start
Getmsg Start
Getmsg End
Getmsg Start
Getmsg End
getdsrs start
Getmsg Start
Getmsg End
getdsrs end
fmtdat start
Getmsg Start
Getmsg End
Getmsg Start
Getmsg End
Getmsg Start
Getmsg End
Getmsg Start
Getmsg End
Getmsg Start
Getmsg End
gtplttim start
gtplttim end
fmtdat end
wtspecln end
mgrdlst start
setfhrfl start
gdfhrs start
gdfhrs end
setfhrfl end
V:WNGB-2.4 --GRID FILE 1 (FIL1) --> FEB180700.NGM104
MODEL=NGMS FROM 2007/02/18/00 LISTING FOR FHR= 0
PARAMETERS SET TO: LEVEL= 850 LAYER=1000/ 500 FHRS= 0/ 24
MSG0 SFC MSG1 SFC ALAT SFC ALON SFC DMAP SFC FFFF SFC EDIR SFC GRDX SFC
GRDY SFC PRES SFC #### SFC SNDP SFC PWAT SFC HGHT SFC LIFT SFC LFTX SFC
HQDVS925 PRES MSL VVEL 700 HGHT 700 TEMP 700 RELH 700 UGRD 700 VGRD 700
VTCY 700 VVEL1000 HGHT1000 TEMP1000 RELH1000 UGRD1000 VGRD1000 VVEL 950
HGHT 950 TEMP 950 RELH 950 UGRD 950 VGRD 950 VVEL 900 HGHT 900 TEMP 900
RELH 900 UGRD 900 VGRD 900 VVEL 850 HGHT 850 TEMP 850 RELH 850 UGRD 850
VGRD 850 VTCY 850 VVEL 800 HGHT 800 TEMP 800 RELH 800 UGRD 800 VGRD 800
VVEL 750 HGHT 750 TEMP 750 RELH 750 UGRD 750 VGRD 750 VVEL 650 HGHT 650
TEMP 650 RELH 650 UGRD 650 VGRD 650 VVEL 600 HGHT 600 TEMP 600 RELH 600
UGRD 600 VGRD 600 VVEL 550 HGHT 550 TEMP 550 RELH 550 UGRD 550 VGRD 550
VVEL 500 HGHT 500 TEMP 500 RELH 500 UGRD 500 VGRD 500 VTCY 500 VVEL 450
HGHT 450 TEMP 450 RELH 450 UGRD 450 VGRD 450 VVEL 400 HGHT 400 TEMP 400
RELH 400 UGRD 400 VGRD 400 VVEL 350 HGHT 350 TEMP 350 RELH 350 UGRD 350
VGRD 350 VVEL 300 HGHT 300 TEMP 300 RELH 300 UGRD 300 VGRD 300 VVEL 250
HGHT 250 TEMP 250 RELH 250 UGRD 250 VGRD 250 VTCY 250 VVEL 200 HGHT 200
TEMP 200 RELH 200 UGRD 200 VGRD 200 VVEL 150 HGHT 150 TEMP 150 RELH 150
UGRD 150 VGRD 150 VVEL 100 HGHT 100 TEMP 100 RELH 100 UGRD 100 VGRD 100
HGHT 50 TEMP 50 RELH 50 UGRD 50 VGRD 50 TEMPS982 RELHS982 SPFHS982
UGRDS982 VGRDS982 TEMPS896 SPFHS896 UGRDS896 VGRDS896 TEMPS784 SPFHS784
UGRDS784 VGRDS784 RELHS735 RELHS715 RELHS325 UGRD 10M VGRD 10M TEMPH018
UGRDH018 VGRDH018 TEMPH027 UGRDH027 VGRDH027 TEMPH036 UGRDH036 VGRDH036
PRESTROP TEMPTROP UGRDTROP VGRDTROP
savlvtm start
getlvltm start
gdfhrs start
gdfhrs end
setfhrfl start
gdfhrs start
gdfhrs end
setfhrfl end
getlvltm end
savlvtm end
mgrdlst end
cmdopen end
findit end
pcgridds32: 150 - CONTINUING
wtpcgln start
grftxt start
grftxt end
wtpcgln end
wtspecln start
Getmsg Start
Getmsg End
Getmsg Start
Getmsg End
getdsrs start
getdsrs end
fmtdat start
gtplttim start
gtplttim end
fmtdat end
wtspecln end
pcgridds32 end
wtpcgln start
grftxt start
grftxt end
wtpcgln end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
isent_sv start
writmth start
writmth end
isent_sv end
WINGRIDDS ENDING - GOODBYE


-------------------------------------------------------------------------------------
(Note, I get the same error if I put 'OTHER' on line 6)

Any ideas?

TIA

Jim


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 19, 2007 11:11 am 
Offline
Senior Member

Joined: Fri Jun 25, 2004 11:42 pm
Posts: 298
All,

Well...Good Golly, Wally!!! I'll look into it.

Also, if you could post the first few lines of your WINGRIDDS.LOG file, that would be most helpful.

Thanks,
Jeff


Top
 Profile  
 
 Post subject: Files Requested
PostPosted: Mon Feb 19, 2007 11:52 pm 
Offline
Member

Joined: Fri Jun 25, 2004 10:40 am
Posts: 42
WINGRIDDS.LOG:

STARTING WINGRIDDS - BETA Release 2.4 02/01/2007

lbinit start
Getmsg Start
Getmsg End
Getmsg Start
Getmsg End
rewlbl start
rewlbl end
rsetlbl start
ctmplbl start
ctmplbl end
rsetlbl end
lbinit end
CreateProdMenu START
CreateProdMenu END
uprcs1 start
uprcs1 end
WINGRIDDS: DIRDATA = E:\WINGRIDDS\GRIDDATA\
uprcs1 start
uprcs1 end
uprcs1 start
uprcs1 end
clrcmd start
clrcmd end
LVL,BTM,TOP,IFHR,HR1,HR2,LYR?,TIM?= 850 1000 500 0 0 24 0 0
rdpltm start
NPLVL,PLVL= 10 1000 850 700 500 400 300 250 200 150 100
NTIM,TINC,TIM= 13 1 72 66 60 54 48 42 36 30 24 18
12 6 0
rdpltm end
wtpcgln start
grftxt start
grftxt end
wtpcgln end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
INGESTGRIB start
INGESTGRIB end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
PCGRIDDS32 STARTING
** BEGIN LOOP TO PROCESS COMMANDS
clrcmd start
clrcmd end
OPEN
COMMAND MODE
uprcas start
uprcas end
uprcas start
uprcas end
uprcs1 start
uprcs1 end
lstcmd start
cchsub start
cchsub end
lstcmd end
PCGRIDDS32: DO THE LOOP
OPEN
clrcmd start
clrcmd end
alias start
alais end
findit start
cmdopen start
grdopn start
FEB190718.AVN003
uprcs1 start
uprcs1 end
wtpcgmsg start
grftxt start
grftxt end
wtpcgmsg end
E:\WINGRIDDS\GRIDDATA\\FEB190718.AVN003
FILE IS VERSION 2
OPENED - 0 0 0 0 0
OPENED - AVN3 17 1 360 1 181 339 10202
=====================
Wingmode:

'E:\WINGRIDDS\GRIB\WAFS\'
'E:\WINGRIDDS\GRIB\NWS\'
'E:\WINGRIDDS\GRIB\MOS\'
'E:\WINGRIDDS\GRIDDATA\'
'METER'
'OTHER'
'E:\WINGRIDDS\PRTFIL\'
'.PNG'


Thanks Jeff!


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 20, 2007 3:15 am 
Offline
Senior Member

Joined: Fri Jun 25, 2004 11:42 pm
Posts: 298
Andy,

OK - other than seeing the issue date at the top is wrong, I noticed, in the WINGMODE.DAT file, the map entry is 'OTHER'. What is in your \USER\MAPFILE.DAT file? I tried it and it worked fine with both 'WORLD' and 'OTHER' listed on the map entry. With the 'OTHER' entry in the WINGMODE.DAT, if there are no map files listed in the MAPFILE.DAT or the entries are wrong, WINGRIDDS will complain about not finding any map files to plot.

Give it a look.
Thanks,
Jeff


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 20, 2007 7:30 am 
Offline
Member

Joined: Fri Jun 25, 2004 10:40 am
Posts: 42
Jeff Still no go for keep getting same error message:

here is my mapfile.dat file from \user subdirectory

NOAM3-STATE.MAP
STATES.MAP
COUNTY.MAP
AFRICABOUND.MAP
ASIABOUND.MAP
EUROPEBOUND.MAP
SOUTHAMBOUND.MAP


I even tried the file w/out the .map extensions and it is still a no go.

Thanks!


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 20, 2007 11:58 am 
Offline
Senior Member

Joined: Fri Jun 25, 2004 11:42 pm
Posts: 298
Andy,

OK - what about replacing the 'OTHER' with 'WORLD' in the WINGMODE.DAT?

Thanks,
Jeff


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 20, 2007 1:04 pm 
Offline
Member

Joined: Fri Jun 25, 2004 10:40 am
Posts: 42
Jeff,

Just did what you asked...still a NO GO get the same error file message.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 21, 2007 12:39 am 
Offline
Senior Member

Joined: Fri Jun 25, 2004 11:42 pm
Posts: 298
Guys,

Several other users have noticed this. It works fine for me (of course). So, next week I'll have another beta release to fix the screen refresh 7 the font issue for the text in the upper left corner. Also, I'll add some extra debug messages dealing with the loading of the map files so when it fails, you can send the WINGRIDDS.OUT file & it will have much more detail to (hopefuly) point to what the problem is.

thanks for your help,
Jeff


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 21, 2007 7:30 am 
Offline
Member

Joined: Fri Jun 25, 2004 10:40 am
Posts: 42
You are welcome and thank you for your time, too!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group