OVER FILL Contour Problem AGAIN!
-
- Senior Member
- Posts: 252
- Joined: Mon May 02, 2005 4:13 pm
- Contact:
It should work if you use your Default Workchart. In the script that i use, i call up a different map every time and you will get the bad map. Try making a new map and put it in a script and run it! You should get the same result i am getting. But like i said, if you use your default workchart, it will work just fine. Thing is, i make plots for all over the country and i have to call up a new map every time.
-
- Member
- Posts: 51
- Joined: Wed Mar 08, 2006 3:42 am
- Location: In a tent in no mans land!
- Contact:
Re: bum script?
Jon:
That was NOT my default map I used. Like you, I use an array of differing maps for our needs! I did try it using a few different maps, and each works just fine.
That was NOT my default map I used. Like you, I use an array of differing maps for our needs! I did try it using a few different maps, and each works just fine.
Try adding an "import" command after your "load" command:
import,C:\Program Files\DigitalAtmosphereWS\Texas.dmf
So you would have:
ERASE
load,C:\Program Files\DigitalAtmosphereWS\Texas.dmf
import,C:\Program Files\DigitalAtmosphereWS\Texas.dmf
analyze,OVER FILL COLOR=255:202:235 GRTN=0 SADC=1:20 STOR=1 DEGF TEMP
...etc
I had a similar problem a few years ago and that worked for me...
--Jeff
import,C:\Program Files\DigitalAtmosphereWS\Texas.dmf
So you would have:
ERASE
load,C:\Program Files\DigitalAtmosphereWS\Texas.dmf
import,C:\Program Files\DigitalAtmosphereWS\Texas.dmf
analyze,OVER FILL COLOR=255:202:235 GRTN=0 SADC=1:20 STOR=1 DEGF TEMP
...etc
I had a similar problem a few years ago and that worked for me...
--Jeff
-
- Senior Member
- Posts: 252
- Joined: Mon May 02, 2005 4:13 pm
- Contact:
figarocat wrote:Try adding an "import" command after your "load" command:
import,C:\Program Files\DigitalAtmosphereWS\Texas.dmf
So you would have:
ERASE
load,C:\Program Files\DigitalAtmosphereWS\Texas.dmf
import,C:\Program Files\DigitalAtmosphereWS\Texas.dmf
analyze,OVER FILL COLOR=255:202:235 GRTN=0 SADC=1:20 STOR=1 DEGF TEMP
...etc
I had a similar problem a few years ago and that worked for me...
--Jeff
Jeff,
You Rock man! That was the problem.. thanks so much.. now time to write a BUNCH of scripts! Well more scripts.
Thanks a million,
Jon