below sentences is my sample
#------PLOT SFC Wx CHART
ingest,D:\Program Files\DigAtmEquinox\archive\syn\@YYZ@MMZ@DDZ00.syn
ERASE
MAKE,1,34.0,118.0,5000,1000,800,0,0,1,1
#...... PLOT RH great than 80%
#ANALYZE,OVER FILL COLOR=130:255:130 EQUA=100 OVER FILL COLOR=160:255:160 GRTN=90 OVER FILL COLOR=200:255:200 GRTN=80 OVER FILL COLOR=180:250:180 GRTN=70 SADC=1:0 STOR=1 RELH Hsfc
PRODUCT,PLF,0,PLOT
EXPORT,D:\Program Files\DigAtmEquinox\MAPS\@YY@MM@DD00_SFC_RELH.gif
this semtences could be work
but if i add the command "POINT"
it show me that the encountered error and file not found
What's wrong???
<<Question>>I have a trouble in scripting
-
- Junior Member
- Posts: 2
- Joined: Sat Aug 18, 2007 3:51 pm
- Location: Taiwan
- Contact:
-
- Senior Member
- Posts: 252
- Joined: Mon May 02, 2005 4:13 pm
- Contact:
-
- Junior Member
- Posts: 2
- Joined: Sat Aug 18, 2007 3:51 pm
- Location: Taiwan
- Contact:
-
- Senior Member
- Posts: 101
- Joined: Sun Nov 30, 2003 5:05 am
- Location: Fort Worth, TX
The PLOT SFC Wx CHART script works as written and draws a map of the "far east".
After removing the # from the 2nd line as wxforecaster pointed out, the Plot RH script works as written. Change to read:
#...... PLOT RH great than 80%
ANALYZE,OVER FILL COLOR=130:255:130 EQUA=100 OVER FILL COLOR=160:255:160 GRTN=90 OVER FILL COLOR=200:255:200 GRTN=80 OVER FILL COLOR=180:250:180 GRTN=70 SADC=1:0 STOR=1 RELH Hsfc
PRODUCT,PLF,0,PLOT
EXPORT,D:\Program Files\DigAtmEquinox\MAPS\@YY@MM@DD00_SFC_RELH.gif
The Mapmaking Command "Point" does not exisit in your script. What are you wanting to do?
From the Manual; page 128, Mapmaking Commands
Point - Plots points
After removing the # from the 2nd line as wxforecaster pointed out, the Plot RH script works as written. Change to read:
#...... PLOT RH great than 80%
ANALYZE,OVER FILL COLOR=130:255:130 EQUA=100 OVER FILL COLOR=160:255:160 GRTN=90 OVER FILL COLOR=200:255:200 GRTN=80 OVER FILL COLOR=180:250:180 GRTN=70 SADC=1:0 STOR=1 RELH Hsfc
PRODUCT,PLF,0,PLOT
EXPORT,D:\Program Files\DigAtmEquinox\MAPS\@YY@MM@DD00_SFC_RELH.gif
The Mapmaking Command "Point" does not exisit in your script. What are you wanting to do?
From the Manual; page 128, Mapmaking Commands
Point - Plots points
-
- Senior Member
- Posts: 101
- Joined: Sun Nov 30, 2003 5:05 am
- Location: Fort Worth, TX