Page 1 of 1

Potential Precip. Placement

Posted: Tue Sep 18, 2018 4:48 pm
by MMWeather
SPC has a combination of PW and Surf Conv on their site. It is listed as potential precipitation placement. I have run this and seems to work pretty well. This script shows pw from a previous script and overlays surf conv lines.
I am also trying to figure out if it is better to add scripts to new categories or to add to the categories already present. That is why some categories have scripts not realted to the category title. Best advice is to check total posts, that will let you know something, could be anything has been added...and it probably is not related to the title of the category. I will try to limit each category in the future, to 5 posts per. 8-)

Erase
analyze,sdvc=9:25.4 stor=9 ssum=7:8 stor=8 mixr hsfc stor=7 ssum=3:6 stor=6 ssum=4:5 stor=5 mixr h925 stor=4 mixr h850 stor=3 ssum=1:2 stor=2 mixr h700 stor=1 mixr h500
analyze,fill color=238:232:170 grtn=0
analyze,fill color=250:250:210 grtn=0.6
analyze,fill color=255:228:181 grtn=0.8
analyze,fill color=245:222:179 grtn=1
analyze,fill color=245:175:150 grtn=1.2
analyze,fill color=205:225:185 grtn=1.4
analyze,fill color=185:215:170 grtn=1.6
analyze,fill color=165:205:155 grtn=1.8
analyze,over Fill color=145:195:140 Grtn=2.0


analyze,cont cint=5 lstn=0 color=50:50:50 dash=3 SMLC=1:1000000 STOR=1 DVRG WIND hsfc
stamp

P19

Re: Potential Precip. Placement

Posted: Tue Sep 18, 2018 6:19 pm
by MMWeather
Another snow script: fill below 0 wet bulb at 700 850 925 and surface levels. areas with all 4 fill types have all levels below 0 wet bulb temp. Theoretically if precip occurs there is possibiity of "wet bulbing" and any snow that occurs will cool "warmer" levels to the point that no melting occurs, theoretically :neutral:

ERASE
ANALYZE,FILL COLOR=0:0:255 LSTN=0 BULB H700
ANALYZE,FILL COLOR=100:100:255 FILS=4 LSTN=0 BULB H850
ANALYZE,FILL COLOR=150:150:255 FILS=5 LSTN=0 BULB H925
ANALYZE,OVER FILL COLOR=200:200:255 FILS=6 LSTN=0 BULB HSFC
STAMP

P19

Re: Potential Precip. Placement

Posted: Wed Sep 19, 2018 2:23 pm
by MMWeather
Another version of pot. precip. place.

This one uses 850mb convergence:

Erase
analyze,sdvc=9:25.4 stor=9 ssum=7:8 stor=8 mixr hsfc stor=7 ssum=3:6 stor=6 ssum=4:5 stor=5 mixr h925 stor=4 mixr h850 stor=3 ssum=1:2 stor=2 mixr h700 stor=1 mixr h500
analyze,fill color=238:232:170 grtn=0
analyze,fill color=250:250:210 grtn=0.6
analyze,fill color=255:228:181 grtn=0.8
analyze,fill color=245:222:179 grtn=1
analyze,fill color=245:175:150 grtn=1.2
analyze,fill color=205:225:185 grtn=1.4
analyze,fill color=185:215:170 grtn=1.6
analyze,fill color=165:205:155 grtn=1.8
analyze,over Fill color=145:195:140 Grtn=2.0


analyze,cont cint=5 lstn=0 color=50:50:50 dash=3 SMLC=1:1000000 STOR=1 DVRG WIND h850
stamp

P19

Re: Potential Precip. Placement

Posted: Thu Sep 20, 2018 1:54 am
by MMWeather
EDITED :oops: :oops: :oops: Fixed line that had SSUM...should have been sdif!!!!!

Fog Stability Index from Tim's Red Book, page121.

#Fog Stability Index Lower no. more likely to experience fog
#From Red Book page 121
ERASE
ANALYZE,STOR=4 vknt WSPD H850 STOR=3 DWPT HSFC STOR=2 TEMP H850 STOR=1 TEMP HSFC
ANALYZE,STOR=5 Sdif=1:2
ANALYZE,STOR=6 SDIF=1:3
ANALYZE,STOR=7 SSUM=5:6
ANALYZE,STOR=8 SSUM=4:7
ANALYZE,FILL COLOR=255:190:0 GRTN=20
analyze,fill color 255:255:255 grtn=25
ANALYZE,FILL COLOR 225:225:225 LSTN=20
ANALYZE,OVER FILL COLOR=200:200:200 LSTN=10
ANALYZE,CONT CINT=5
STAMP

P19

Re: Potential Precip. Placement

Posted: Wed Oct 03, 2018 1:39 pm
by MMWeather
Thought I had included this earlier, may not have done so. Temp contour (fill and line).


erase
analyze,FILL COLOR=167:000:255 FILS=0 GRTN=-10 FILL COLOR=249:000:249 FILS=0 GRTN=-20 DEGF TEMP
analyze,FILL COLOR=003:234:249 FILS=0 GRTN=30 FILL COLOR=000:088:255 FILS=0 GRTN=20 FILL COLOR=255:255:230 FILS=0 GRTN=10 FILL COLOR=039:000:255 FILS=0 GRTN=0
analyze,FILL COLOR=255:168:000 FILS=0 GRTN=70 FILL COLOR=252:218:001 FILS=0 GRTN=60 FILL COLOR=210:249:003 FILS=0 GRTN=50 FILL COLOR=104:253:046 FILS=0 GRTN=40
analyze,OVER FILL COLOR=214:115:134 FILS=0 GRTN=110 FILL COLOR=183:050:069 FILS=0 GRTN=100 FILL COLOR=190:026:001 FILS=0 GRTN=90 FILL COLOR=255:099:000 FILS=0 GRTN=80
analyze,cont cint=5 color=175:175:175
stamp


P19

Re: Potential Precip. Placement

Posted: Sat Oct 13, 2018 4:29 pm
by MMWeather
Added diagonal fill for convergence to original, and added output of relative humidity at 925 mb X ave mixr. May add an Ave rel. hum. X ave. mixr. later.


#Potential precip. placement using Rel. Hum X Ave. Mixr with hashed convergence
ERASE
ANALYZE,STOR=1 sdvc=9:25.4 stor=9 ssum=7:8 stor=8 mixr hsfc stor=7 ssum=3:6 stor=6 ssum=4:5 stor=5 mixr h925 stor=4 mixr h850 stor=3 ssum=1:2 stor=2 mixr h700 stor=1 mixr h500
ANALYZE,SMLT=1:3 STOR=3 SDVC=2:100 STOR=2 RELH H925
ANALYZE,OVER FILL COLOR=0:125:0 GRTN=2.5 FILL COLOR=0:185:0 GRTN=2 FILL COLOR=0:255:0 GRTN=1.5 FILL COLOR=125:255:125 GRTN=1 FILL COLOR=185:255:185 GRTN=0.5
ANALYZE,CONT CINT=0.5
analyze,over fill fils=4 lstn=0 color=50:50:50 dash=3 SMLC=1:1000000 STOR=1 DVRG WIND hsfc
analyze,cont cint=5 lstn=0
stamp



#Potential precip. placement using Ave. Mixr with hashed convergence
Erase
analyze,sdvc=9:25.4 stor=9 ssum=7:8 stor=8 mixr hsfc stor=7 ssum=3:6 stor=6 ssum=4:5 stor=5 mixr h925 stor=4 mixr h850 stor=3 ssum=1:2 stor=2 mixr h700 stor=1 mixr h500
analyze,fill color=238:232:170 grtn=0
analyze,fill color=250:250:210 grtn=0.6
analyze,fill color=255:228:181 grtn=0.8
analyze,fill color=245:222:179 grtn=1
analyze,fill color=245:175:150 grtn=1.2
analyze,fill color=205:225:185 grtn=1.4
analyze,fill color=185:215:170 grtn=1.6
analyze,fill color=165:205:155 grtn=1.8
analyze,over Fill color=145:195:140 Grtn=2.0


analyze,over fill fils=4 lstn=0 color=50:50:50 dash=3 SMLC=1:1000000 STOR=1 DVRG WIND hsfc
analyze,cont cint=5 lstn=0
stamp

P19