WINGRIDDS Beta 2.13 & PCGRIDDS32s' NGRB2PCG32 Version 2.

Discuss any other weather software not covered above, including data feeds, weather web pages, and more!
jkrob
Senior Member
Posts: 300
Joined: Fri Jun 25, 2004 11:42 pm
Contact:

WINGRIDDS Beta 2.13 & PCGRIDDS32s' NGRB2PCG32 Version 2.

Post by jkrob »

All,

After a long spring & summer working away in my cave on the next major WINGRIDDS release, I came across some more bug fixes for WINGRIDDS as well as an update to the PCGRIDDS32 GRIB ingest utility NGRB2PCG32. Please check out the WINGRIDDS & PCGRIDDS32 Home page winweather.org & check them out.

Thanks,
Jeff Krob
WINGRIDDS & PCGRIDDS32 System Developer
Fred Capello
Member
Posts: 15
Joined: Sat Nov 29, 2003 12:47 am
Location: Willemstad, Curaçao, Netherlands Antilles
Contact:

Can't ingest GRIB Data

Post by Fred Capello »

Hi Jeff,

I visited this forum yesterday (Saturday, October 20) for the first time in more than a month and noticed your announcements of the release of the latest version of WINGRIDDS. I downloaded and installed it and I did notice an improvement in the appearance of the information text in the upper left corner, especially when I changed it from 1024 x 768 to 1152 x 864 pixels. At 1024 x 768 pixels, I still lose some of the text.

Tonight, Sunday, I ran into another problem when I tried to convert WAFS GRIB Data of the 211800Z run. Normally I download GFS files from the ftp://tgftp.nws.noaa.gov/SL.us008001/ST.opnl site and of the fh.nnn.tl.press._ar.octantl type. When I selected as usual the WL1 area, it ran briefly and then quit.

I tried it with both GRIB1 and GRIB2 file types but continued to get the same result. Is it the GRIB2PCG32.OUT file that I should send to you so you can analyze what's wrong? Below is what I read in this file.

GRIB2PCG32 FOR WINGRIDDS VERSION 3.7 09/20/2007

SECTOR =
OCTETS.WL1

OUTPUT DATA DIRECTORY: c:\WINGRIDDS\GRIDDATA\
PREPROCESSING WAFS GRIB FILES
FILEIN =
c:\WINGRIDDS\GRIB\WAFS\OctantL\fh.012_tl.press_ar.octantl

fh.012_tl.press_ar.octantl 461086 BYTES
fh.012_tl.press_ar.octantl --- NEW GRIB DATA FILE OPENED

===== BEGIN NEW GRIB EDITION 1 RECORD =====
REC#,SIZE = 1 7124
GRIB MESSAGE # 1
IGRBST,IPTR,NBYTES= 1 1 7124



Please advise how to solve this problem.

Thanks in advance for your reaction!

Fred.
jkrob
Senior Member
Posts: 300
Joined: Fri Jun 25, 2004 11:42 pm
Contact:

Post by jkrob »

Fred,

Thanks for your message & sorry for your problems. I tried your setup (but with GRIB2 data) and it worked fine for me (of course!). I need more info which I think (hope) GRIB2PCG32 is providing. If you can, run the utility from the MS Windows command line:

c:\> cd wingridds
c:\> grib2pcg32 octets.wl1

When it fails this time, some 'crash' debug information may be on the screen. Please copy the info & foreward it to me.

Thanks in advance,
Jeff Krob
WINGRIDDS Sysytem Developer
Fred Capello
Member
Posts: 15
Joined: Sat Nov 29, 2003 12:47 am
Location: Willemstad, Curaçao, Netherlands Antilles
Contact:

Post by Fred Capello »

Hi Jeff,

Thanks for your quick reaction.

Here is what I got after entering the command you sent me:

C:\>cd wingridds

C:\WINGRIDDS>grib2pcg32 octets.wl1
GRIB2PCG32 FOR WINGRIDDS VERSION 3.7 09/20/2007

PREPROCESSING WAFS GRIB FILES
fh.012_tl.press_ar.octantl 461086 BYTES
fh.012_tl.press_ar.octantl --- NEW GRIB DATA FILE OPENED
PRE-PROCESSING GRIB DATA FIELD # 1
forrtl: severe (168): Program Exception - illegal instruction
Image PC Routine Line Source
Grib2pcg32.exe 0041BFA4 GRIBINV 397 GRIBINV.for
Grib2pcg32.exe 0040EF48 GRIB2PCG32 341 Grib2pcg32.for
Grib2pcg32.exe 0047F609 Unknown Unknown Unknown
Grib2pcg32.exe 00472A14 Unknown Unknown Unknown
kernel32.dll 7C816FD7 Unknown Unknown Unknown


Hope this helps solving the problem.

Cheers,

Fred.
jkrob
Senior Member
Posts: 300
Joined: Fri Jun 25, 2004 11:42 pm
Contact:

Post by jkrob »

Fred,

THANKS!! Exactly what I need.

>forrtl: severe (168): Program Exception - illegal instruction
>Image PC Routine Line Source
>Grib2pcg32.exe 0041BFA4 GRIBINV 397 GRIBINV.for
>Grib2pcg32.exe 0040EF48 GRIB2PCG32 341 Grib2pcg32.for

Hmmmm...One more thing - what operating system version are you running (I should have asked that earlier)?

Thanks again,
Jeff
Fred Capello
Member
Posts: 15
Joined: Sat Nov 29, 2003 12:47 am
Location: Willemstad, Curaçao, Netherlands Antilles
Contact:

Post by Fred Capello »

Jeff,
I'm running Windows XP Professional 5.1.2600 Service Pack 2 Build 2600.
In case you need to know, my computer is a DELL Dimension 4700.

Cheers,

Fred.
jkrob
Senior Member
Posts: 300
Joined: Fri Jun 25, 2004 11:42 pm
Contact:

Post by jkrob »

Fred,

I'm sorry but I cannot recreate your problem on my WinXP system. No one else has mentioned this which makes it even more difficult. An update is being relesed shortly & maybe that will clear up your issue.

Sorry for your problems,
Jeff
Fred Capello
Member
Posts: 15
Joined: Sat Nov 29, 2003 12:47 am
Location: Willemstad, Curaçao, Netherlands Antilles
Contact:

Using earlier version of WINGRIDDS

Post by Fred Capello »

Thanks for your message, Jeff! In the meantime, I uninstalled WINGRIDDS and then installed an earlier version of the program. I'll await the next update, download it and will let you know how it performs on my computer.
Craig4Wx
Junior Member
Posts: 5
Joined: Fri Oct 12, 2007 10:39 pm

Error in NGRB2PCG32 code

Post by Craig4Wx »

Hi Jeff,

I found a bug in NGRB2PCG32. 2.13 is looking at PCGMODE.DAT for the output directory from the first line:

'MENU'
'c:\PCGRIDDS32\GRIDDATA' 'c:\PCGRIDDS32\GRIDDATA'
'METER'
'WORLD'

but PCGRIDDS32.EXE is looking for the start up mode in the first line. So, you need to change the code in NGRB2PCG32.EXE to look at the second line in PCGMODE.DAT for the output file and ignor the first line.

Craig
jkrob
Senior Member
Posts: 300
Joined: Fri Jun 25, 2004 11:42 pm
Contact:

Post by jkrob »

Craig,

NUTS!!! You are correct & thanks for the find. I'll get the fixed version out this evening.

Jeff
Post Reply