Not sure if more work has been done with the white box problem.
Downloaded V1.0f. When trying to erase a map plot I get the white box.
White Box
-
- Administrator
- Posts: 535
- Joined: Sat Nov 22, 2003 10:47 pm
-
- Administrator
- Posts: 535
- Joined: Sat Nov 22, 2003 10:47 pm
-
- Member
- Posts: 28
- Joined: Sat Nov 29, 2003 5:05 pm
-
- Administrator
- Posts: 535
- Joined: Sat Nov 22, 2003 10:47 pm
-
- Member
- Posts: 28
- Joined: Sat Nov 29, 2003 5:05 pm
I patched with 1.0f and occasionally I'm experiencing the crash, but it cannot be easily reproduced. It comes and goes.TimVasquez wrote:I tried what you said and it plots fine. You'll have to provide the version # and a detailed description of the steps leading up to the error, as otherwise I cannot create an error condition and thus can't repair anything that might be wrong.
Tim
I will refrain on this, at the time being, but it is really annoying.
Crashed DAWS once, it will crash forever and with any combination of settings, until reboot.
-
- Member
- Posts: 35
- Joined: Sat Jan 17, 2004 12:49 pm
Tim,
I usually have two applications open of DAWS. One for the UK, and one for Europe. The Erase on the first [UK] application is now OK with V1.0f, and does not need a map regenerated. However, the Europe map when erased just clears the white box and the UK map is visible underneath.
When I regenerate the Europe map its OK.
Phil
I usually have two applications open of DAWS. One for the UK, and one for Europe. The Erase on the first [UK] application is now OK with V1.0f, and does not need a map regenerated. However, the Europe map when erased just clears the white box and the UK map is visible underneath.
When I regenerate the Europe map its OK.
Phil