Page 1 of 1
Menu commands
Posted: Tue Oct 02, 2018 12:49 pm
by Skytower
Using the new release and making slow progress since my old scripts were overwritten. In the dropdown Analysis-Temperature there is a command for "Temperature-shaded(degF)" which works nicely.. This command is not listed in the DA menu commands. Does anyone have it. I see a similar command under wind which is listed. If anyone can supply the one for temperature it would be appreciated. Thanks
Re: Menu commands
Posted: Wed Oct 03, 2018 1:09 pm
by MMWeather
erase
analyze,FILL COLOR=167:000:255 FILS=0 GRTN=-10 FILL COLOR=249:000:249 FILS=0 GRTN=-20 DEGF TEMP
analyze,FILL COLOR=003:234:249 FILS=0 GRTN=30 FILL COLOR=000:088:255 FILS=0 GRTN=20 FILL COLOR=255:255:230 FILS=0 GRTN=10 FILL COLOR=039:000:255 FILS=0 GRTN=0
analyze,FILL COLOR=255:168:000 FILS=0 GRTN=70 FILL COLOR=252:218:001 FILS=0 GRTN=60 FILL COLOR=210:249:003 FILS=0 GRTN=50 FILL COLOR=104:253:046 FILS=0 GRTN=40
analyze,OVER FILL COLOR=214:115:134 FILS=0 GRTN=110 FILL COLOR=183:050:069 FILS=0 GRTN=100 FILL COLOR=190:026:001 FILS=0 GRTN=90 FILL COLOR=255:099:000 FILS=0 GRTN=80
analyze,cont cint=5 color=175:175:175
stamp
P19
Re: Menu commands
Posted: Wed Oct 03, 2018 1:16 pm
by MMWeather
If you are looking for drop down, it will not show labeled contours. Also if you are looking for scripts they and questions re: scripts are found on the script Lab. area on this board.
OVER FILL COLOR=214:115:134 FILS=0 GRTN=110 FILL COLOR=183:050:069 FILS=0 GRTN=100 FILL COLOR=190:026:001 FILS=0 GRTN=90 FILL COLOR=255:099:000 FILS=0 GRTN=80 FILL COLOR=255:168:000 FILS=0 GRTN=70 FILL COLOR=252:218:001 FILS=0 GRTN=60 FILL COLOR=210:249:003 FILS=0 GRTN=50 FILL COLOR=104:253:046 FILS=0 GRTN=40 FILL COLOR=003:234:249 FILS=0 GRTN=30 FILL COLOR=000:088:255 FILS=0 GRTN=20 FILL COLOR=255:255:230 FILS=0 GRTN=10 FILL COLOR=039:000:255 FILS=0 GRTN=0 FILL COLOR=167:000:255 FILS=0 GRTN=-10 FILL COLOR=249:000:249 FILS=0 GRTN=-20 DEGF TEMP
P19