v1.0e: Problem with Composite Reflectivity

Baroclinicity · Post by **Baroclinicity** » Sun Apr 11, 2004 4:50 am

When I plot the short range composite reflectivity (37 CR) in Day v1.0e, the data doesn't plot the way it should. However, data plots correctly for the long range version (38 CR). It looks like the data is not being scaled correctly. I don't think it's the basemap, as other products are showing correctly.

Here is a comparison between the DA plot and the NWS website plot

DA

NWS

Baroclinicity · Post by **Baroclinicity** » Mon Apr 12, 2004 2:35 am

After looking at other products, I am getting mixed results with the precipitation accumulation data as well (1 hour, 3 hour and storm total). It appears that the program is centering the data at the lower-right corner of the basemap or off the basemap. I have tested these products using freshly drawn basemaps, instead of imported maps. Again, the problem seems to be intermittent. Sometimes I can get those products to plot correctly, other times they look like they aren't scaled properly, with the data not centered on the image. I have also noticed this when viewing archived Level III data.

Baroclinicity · Post by **Baroclinicity** » Mon Apr 12, 2004 2:40 am

Here is another example using Storm Total Precip. Map is centered in KILN at 750 miles.

Post by **Tim Vasquez** » Thu Apr 15, 2004 4:19 am

This is interesting. We are having problems finding the scaling factors in the data packets... it's almost as if the radars are making up their own coordinate systems. I will revisit this issue again. The bug would only affect certain raster products such as the ones you posted, and would not affect radial products such as Ref/Vel/Width.

Tim